wpe3.jpg (8042 bytes)

A (I.C.) INSERT NUMBER T B D R RELIEF ANGLE
7/32 TPEE-731 .094 .313 .15 .015 11°
7/32 TPEE-732 .094 .297 .14 .031 11°
1/4 TPG-221 .125 .359 .15 .015 11°
1/4 TPG-22 .125 .344 .14 .031 11°
5/16 TPG-2.521 .125 .453 .15 .015 11°
5/16 TPG-2.522 .125 .438 .14 .031 11°
3/8 TPG-321 .125 .547 .15 .015 11°
3/8 TPG-321 .125 .547 .23 .015 11°
3/8 TPG-322 .125 .531 .14 .031 11°
3/8 TPG-322 .125 .531 .22 .031 11°
3/8 TPG-323 .125 .516 .21 .046 11°
1/2 TPG-431 .187 .734 .23 .015 11°
1/2 TPG-432 .187 .719 .22 .031 11°
5/16 TEC-2.521 .125 .453 .15 .015 20°
5/16 TEC-2.522 .125 .438 .14 .031 20°
3/8 TEC-321 .125 .547 .15 .015 20°
3/8 TEC-322 .125 .531 .14 .031 20°

  *Modifications to above with customer specifications will be quoted upon request.

wpe2.jpg (7941 bytes)

HOLE SIZE A (I.C.) INSERT NUMBER T B D R RELIEF ANGLE
.134 5/16 TPMW-2.521 .125 .453 .15 .015 11°
.134 5/16 TPMW-2.522 .125 .438 .14 .031 11°
.134 5/16 TEGW-2.521 .125 .453 .15 .015 20°
.134 5/16 TEGW-2.522 .125 .438 .14 .031 20°

*Modifications to above with customer specifications will be quoted upon request.