Most companies have an area of specialty, this is ours.  Diamond selection, engineering principles, extensive equipment and years of experience go into the manufacturing of each special form dresser.  A full radius must be lapped and blended into the proper included angles for each tool.  Various requirements including precision centering, match sets, precision shanks, above center dimensions, etc. require rigorous quality control and testing procedures.  VERTEX will also custom manufacture these special form dressers to your specifications.

wpeD.jpg (12194 bytes)

TOOL NUMBER INCLUDED ANGLE RADIUS
5/40/05 OR 10/40/05 40 .005"
5/40/10 OR 10/40/10 40 .010"
5/40/20 OR 10/40/20 40 .020"
5/60/05 OR 10/60/05 60 .005"
5/60/10 OR 10/60/10 60 .010"
5/60/20 OR 10/60/20 60 .020"

wpeF.jpg (13766 bytes)

TOOL NUMBER INCLUDED ANGLE RADIUS
J&L 40-.007 40 .007"
J&L 40-.011 40 .011"
J&L 40-.017 40 .017"
J&L 48-.007 48 .007"
J&L 48-.011 48 .011"
J&L 48-.017 48 .017"

wpe10.jpg (12798 bytes)

TOOL NUMBER INCLUDED ANGLE RADIUS
HG-40-.015 40 .015"
HG-40-.020 40 .020"
HG-40-.025 40 .025"
HG-48-.015 48 .015"
HG-48-.020 48 .020"
HG-48-.025 48 .025"
HG-60-.015 60 .015"
HG-60-.020 60 .020"
HG-60-.025 60 .025"
HG-72-.015 72 .015"
HG-72-.020 72 .020"
HG-72-.025 72 .025"